Quat 188 Material Safety Data Sheet

Material Safety Data Sheet

                                                                                            Date:  2023-01-01

Section 1：Chemical Product and Company Identification

Product Name

3-Chloro-2-hydroxypropyltrimethyl Ammonium Chloride

Alias

Cationic reagent, Quat 1881, PTAC 1881,  Cationic etherifying agent，Quaternary Ammonium Salt

CAS No.

3327-22-8

HS code

292390

Company

Shandong Tiancheng Chemical Co., Ltd

Address

66 West of Beizhan Rd, Yanzhou, China

Zip code

272117

Telephone

0537-3414528

Fax

0537-3414528

Mail

yanzhongwen@yztchg.com

Validity of MSDS

3 years

Section 2:  Composition/Information on Ingredient

Formula

C₆H₁₅NOCl₂

Chemical name

CAS  No

Content

3-Chloro-2-Hydroxypropyl Trimethyl Ammonium Chloride

3327-22-8

≥69%

Water

7732-18-5

≤31%

Section 3: Hazards Identification

Risk Category

Reacts with alkaline compounds to form the corresponding epoxide 2,3-Epoxypropyltrimethylammonium chloride is highly skin-sensitizingand showed carcinpgenic properties in animal experiments.

Section 4：First Aid Measures

Skin exposure：

Wahs with plenty of water immediately, take off all contaminated clothing immediately. 

Eye contact：

Wash with plenty of water at least 5 minutes.

Inhalation：

Move to fresh air, keep patient half sitting with upper boday raised and consult a physician immediately.

Section 5: Fire Fighting Measures

Lower explosion limit

Not applicable

Upper explosion limit

Not applicable

Extinguishing

Alcohol-resistant foam, dry chemical, carbon dioxide etc.

Fire fighting procedures

Fire fighters must wear self-contained breathing apparatus, full protective clothing when extinguishes fire. Keep the containers cool and prevent rupture with water at the scene.

Conditions to avoid

Keep away from fire, strong oxidant, strong acid, strong base etc

Hazardous Combustion Products

Carbon monoxide, carbon dioxide

Section 6: Accidental Release Measures

If the product is not contaminated, put it in a clean container. If the product is contaminated, put it in a container and make appropriate disposal. Once accidental spills refer to section 8, personal protective apparatus, and general health habits.

Section 7: Handling and Storage

General

Store in shady and dry places, 5-35°C. Tightly close the opening of containers if not used.

Attention

Pay attention to moisture. Avoid storing products in incompatible materials nearby. Refer to section 10. Away from fire and heat. 

Section 8: Exposure Controls/Personal Protection

Engineering controls

Pay attention to ventilation, airtight operation.

General Health Habit

Avoid its contact with eyes, skin and clothing. Eat and drink after thoroughly clean.

Personal Protective Apparatus

Wear waterproof gloves and proper protective clothing.

Maintenance/Protective measures

Completely isolate and clean all equipment and pipes before maintenance.

Section 9: Physical and Chemical Properties

Product Name

3-Chloro-2-Hydroxypropyltrimethyl Ammonium Chloride

Item

Description

Appearance

Colorless liquid

Active content / %

≥69.0

DCH content %

≤10×10-4

ECH content / %

≤5×10-4

Water/ %

≤31.0

pH value

4.0-7.0

Crystallization Point

-14 ℃

Odor Threshold

Odorless

Melting point/range

Not applicable to liquids

Flash point

closed cup Pensky-Martens Closed Cup ASTM D 93 None

Evaporation Rate (Butyl Acetate = 1)

< 0.5 Estimated.

Flammability (solid, gas)

Not applicable to liquids

Lower explosion limit

Not applicable

Upper explosion limit

Not applicable

Vapor Pressure

<= 17.5 mmHg at 20 °C (68 °F) ASTM D5191

Relative Vapor Density (air = 1)

3.55 Literature

Relative Density (water = 1)

1.17 at 20 °C (68 °F) / 20.00 °C Literature

Water solubility

Literature Miscible with water

Partition coefficient: n-octanol/water

no data available

Auto-ignition temperature

Not applicable

Decomposition temperature

No test data available

Kinematic Viscosity

23.1 cSt at 20 °C (68 °F) Literature

Explosive properties

no data available

Oxidizing properties